Midea MA3-24HRFN8-QRD0GW Prime 2 inverter air conditioner

Midea MA3-24HRFN8-QRD0GW Prime 2 inverter air conditioner

The new Midea MA3-24HRFN8-QRD0GW Prime 2 inverter air conditioner has an A++/A+ (cooling/heating) energy efficiency class.

Features and extras of the Midea MA3-24HRFN8-QRD0GW Prime 2 inverter air conditioner

High Density filter

Compared to ordinary high-density dust filters, the high-density filter captures the finest dust particles in the air and provides up to 80% cleaner and healthier air.

Cold-catalyst filter

The cold-catalyst filter eliminates formaldehyde and other volatile organic compounds (VOCs), as well as harmful gases and odors.

56°C sterilization

Unlike normal self-cleaning and i-Clean mode, in "56°C sterilization" mode the heat exchanger is frozen in cooling mode, then heated to 56°C for 30 to 60 minutes, thus destroying up to 99.9% of harmful organisms on the heat exchanger of the indoor unit. The "56°C sterilization" function can last up to 95 minutes.

Low ambient cooling

The low temperature kit allows air conditioning systems to operate in cooling mode at an outdoor temperature of -15°C.

Golden Fin heat exchanger coating

The Golden Fin coating is more resistant to oxidation and corrosion than ordinary Blue Fin coating. Golden Fin effectively prevents the growth and spread of bacteria and improves resistance to corrosive elements.

Refrigerant leak detection

The indoor unit of the air conditioner detects an error code "EC", which will be displayed and will stop working automatically when a freon leak is detected. This will protect the air conditioning compressor from damage caused by high temperatures when the refrigerant leaks. This function is only available in cooling mode.

8°C heating

In 8°C heating mode, this constant temperature is maintained, thus protecting the home from excessive cooling in winter or freezing of pipes and houseplants. The regime is especially suitable in the long absence of the occupants of the home.

Turbo mode

When Turbo mode is activated, the indoor unit fan starts running at maximum speed to ensure the desired temperature as quickly as possible. The mode lasts a maximum of 20 minutes, after which it automatically returns to the preset mode before activating Turbo mode.

Horizontal Swing

Horizontal louvers are floated at an angle of 120 °, while with conventional air conditioners this happens only at 90 °. These more flexible louvers provide cooling that is wider and more even.

Follow Me

The remote control has a built-in temperature sensor that automatically regulates the operating temperature depending on the measured temperature in the area in which it is located.

ECO mode

This economy mode integrates a new innovative ECO energy saving technology. When the “ECO” button is activated, the air conditioner reduces energy consumption by 60% within 8 hours of continuous operation.

Night mode

When night mode is activated during cooling, the air conditioner automatically raises the room temperature by 1 ° C for the first two hours, after which it remains fixed. When night mode is activated during heating, the air conditioner automatically lowers the room temperature by 1 ° C for the first two hours, after which it remains fixed.

1W Standby

The air conditioner automatically switches to power save mode when it is turned off (in Standby mode). This reduces power consumption from 5W to 1W, giving you up to 80% energy savings.

Two-way draining

The drain pipe can be routed to the left and right side of the indoor unit of the air conditioner for easy and convenient installation.

Automatic restart

In the event that the air conditioner stops working unexpectedly due to a power outage, it will restart automatically as soon as power is restored and will start operating in the mode set before the power was turned off.

24-hour timer

Ability to set a 24-hour timer to turn the air conditioning system on and off within 24 hours.

Louver memory

The position of the horizontal valve of the air conditioning system is saved when switched off and is restored automatically when switched on again.

Multi-split compatibility

The indoor unit is compatible with both mono and multi inverter systems, allowing easy selection of suitable indoor and outdoor units. This is a convenient solution for warehouses and shopping centers.

Breeze Away

At the touch of a button, the airflow direction is automatically adjusted to the maximum angle to prevent direct airflow.

Gear Shift

Possibility to set the operating power of the compressor to 50%, 75% or 100%, which allows direct regulation of power consumption. Gear Change is only available in cooling mode.

Technical Specifications for Midea MA3-24HRFN8-QRD0GW Prime 2 inverter air conditioner