Ceiling-floor type inverter air conditioner Midea MUEU-18HRFNX(GA)
- Type: Ceiling-floor type air conditioner;
- Technology: Inverter air conditioner;
- Energy Class: А++/A+;
- Cooling SEER: 6.20;
- Heating SCOP: 4.00;
- Capacity: 18 000 Btu;
- Warranty: 36 months.
Midea MUEU-18HRFNX(GA) inverter ceiling-floor air conditioner
The Midea MUEU-18HRFNX(GA) inverter air conditioner achieves seasonal energy efficiency class A++ / A+ and has many intelligent features that will provide unforgettable comfort and coziness in every room. Thanks to its sleek design, the indoor unit fits into interiors of all kinds.
Features and extras of the Midea MUEU-18HRFNX(GA) inverter ceiling-floor air conditioner
24-hour timer
Ability to set a 24-hour timer to turn the air conditioning system on and off within 24 hours.
Automatic restart
In the event that the air conditioner stops working unexpectedly due to a power outage, it will restart automatically as soon as power is restored and will start operating in the mode set before the power was turned off.
Turbo mode
When Turbo mode is activated, the indoor unit fan starts running at maximum speed to ensure the desired temperature as quickly as possible. The mode lasts a maximum of 20 minutes, after which it automatically returns to the preset mode before activating Turbo mode.
Fresh air inlet
Outside air can be supplied through an additional ventilation duct. This ensures clean and fresh air in the air-conditioned room.
Night mode
When night mode is activated during cooling, the air conditioner automatically raises the room temperature by 1 ° C for the first two hours, after which it remains fixed. When night mode is activated during heating, the air conditioner automatically lowers the room temperature by 1 ° C for the first two hours, after which it remains fixed.
Twin system
The Twin system consists of two indoor units with different capacity from the same series connected to one outdoor unit.
3D Airflow
The louvers of the indoor unit of the air conditioner move automatically in all directions, ensuring even distribution of the air-conditioned air in all corners of the room.
LCD display
The indoor unit has a large LCD display giving information about the operation of the air conditioning system.
Horizontal Swing
Horizontal louvers are floated at an angle of 120 °, while with conventional air conditioners this happens only at 90 °. These more flexible louvers provide cooling that is wider and more even.
Vertical Swing
Vertical louvers float at an angle of 110 °, while with conventional air conditioners this happens only at 80 °. This results in cooling that is wider and more even.
Alarm system port
When a fault is detected in the air conditioning system, an external alarm system is activated, which signals an error and automatically stops its operation.
Refrigerant leak detection
The indoor unit of the air conditioner detects an error code "EC", which will be displayed and will stop working automatically when a freon leak is detected. This will protect the air conditioning compressor from damage caused by high temperatures when the refrigerant leaks.
Two-way draining
The drain pipe can be routed to the left and right side of the indoor unit of the air conditioner for easy and convenient installation.
Easy maintenance and service
The air conditioning system is specially optimized for easy maintenance and service.
Louver memory
The position of the horizontal valve of the air conditioning system is saved when switched off and is restored automatically when switched on again.
Wired Control
Wired controller can be fixed to the wall for a permanently mounted control solution.
Central Management (optional)
The central control is a multifunctional device that can control up to 64 indoor units with a maximum connection length of up to 1200 meters.
Technical Specification for Ceiling-Floor Air Conditioner Midea MUEU-18HRFNX(GA)
| Model | Indoor Unit | MUEU-18HRFNX(GA) | |
|---|---|---|---|
| Outdoor Unit | MOX330U-18HFN8-Q(GA) | ||
| Power Supply | V/O/Hz | 220-240 / 1 / 50 | |
| Capacity | Cooling | kW | 5.28 (2.71 - 5.86) |
| Heating | 5.57 (2.42 - 6.30) | ||
| Power Input | Cooling / Heating | kW | 1.45 (0.67 - 2.02) / 1.50 (0.54 - 1.64) |
| SEER | Cooling | W/W | 6.2 |
| SCOP | Heating | 4.0 | |
| Energy Efficiency Class | Cooling | A++ | |
| Heating | A+ | ||
| Running Current | Cooling/ Heating | A | 6.00 (3.20 - 9.00) / 6.60 (2.70 - 7.30) |
| Air Flow (indoor unit) | m3/h | 958 / 839 / 723 | |
| Sound Pressure (indoor unit) | dB(A) | 43.5 / 41 / 36.5 / 24 | |
| Sound Power (indoor unit) | dB(A) | 59 | |
| Air Flow (outdoor unit) | m3/h | 2100 | |
| Sound Pressure (outdoor unit) | dB(A) | 56 | |
| Sound Power (outdoor unit) | dB(A) | 65 | |
| Dimensions W x D x H Weight | Indoor Unit | mm | 1068 x 675 x 235 |
| kg | 28 | ||
| Outdoor Unit | mm | 805 x 330 x 554 | |
| kg | 32.5 | ||
| Refrigerant piping (liquid/gas) | mm | 6.35 / 12.7 | |
| Max. refrigerant pipe length | m | 30 | |
| Max. difference in level | 20 | ||
| Operation Temperature | Cooling | °C | -15 ~ 50 |
| Heating | -15 ~ 24 | ||
| Refrigerant / Charged (kg) | R32 / 1.15 | ||
| Type | Inverter |
| Cooling Efficiency | A++ |
| Heating Efficiency | A+ |
| Cooling Capacity | 5.28 kW |
| Heating Capacity | 5.57 kW |
| Btu | 18000 Btu |