Midea MKA-V600R Two Pipe Cassette Type Fan Coil
- Type: Fan Coil;
- Technology: Invertor Fan Coil;
- Warranty: 36 months.
Midea MKA-V600R Two Pipe Cassette Type Fan Coil
Midea MKA-V600R Two Pipe Cassette Type Fan Coil delivers high heating and cooling power while delivering a modern and stylish design. The cartridge achieves low noise levels and high efficiency thanks to the DC inverter motor. The built-in condensate pump is powerful enough to lift the condensate up to 750mm. The fan coil also has a vent for fresh air outside the room.
Technical Specifications for Midea MKA-V600R Two Pipe Cassette Type Fan Coil
| Model | MKA-V600R | ||
|---|---|---|---|
| Power supply | V/Ph/Hz | 220-240 / 1 / 50 | |
| Air flow (H/M/L) | m3/h | 1175 / 987 / 768 | |
| CFM | 691 / 580 / 451 | ||
| Cooling1 | Capacity (H/M/L) | kW | 5.93 / 5.3 / 4.4 |
| Water flow rate (H/M/L) | m3/h | 1.06 / 0.92 / 0.77 | |
| Water pressure drop (H/M/L) | kPa | 19.2 / 15.4 / 11 | |
| Power input (H/M/L) | W | 41 / 27 / 17 | |
| Heating2 | Capacity (H/M/L) | kW | 6.06 / 6.35 / 5.32 |
| Water flow rate (H/M/L) | m3/h | 1.30 / 1.14 / 1.13 | |
| Water pressure drop (H/M/L) | kPa | 25.9 / 20.1 / 19.9 | |
| Power input (H/M/L) | W | 42 / 28 / 17 | |
| Heating3 | Capacity (H/M/L) | kW | 8.42 / 7.37 / 6.06 |
| Water flow rate (H/M/L) | m3/h | 1.06 / 0.92 / 0.77 | |
| Water pressure drop (H/M/L) | kPa | 16.9 / 12.7 / 8.6 | |
| Power input (H/M/L) | W | 42 / 28 / 17 | |
| Sound pressure level (H/M/L) | dB(A) | 43 / 39 / 33 | |
| Fan motor | Type | DC motor | |
| Quantity | 1 | ||
| Coil | Row | 2 | |
| Max. working pressure | MPa | 1.6 | |
| Diameter | mm | φ7 | |
| Panel | Net dimensions (W х H х D) | mm | 950 x 45 x 950 |
| Packing size (W х H х D) | mm | 1035 х 90 х 1035 | |
| Net weight | kg | 6 | |
| Gross weight | kg | 9 | |
| Body | Net dimensions (W х H х D) | mm | 840 x 230 x 840 |
| Packing size (W х H х D) | mm | 900 x 260 x 900 | |
| Net weight | kg | 23 | |
| Gross weight | kg | 28 | |
| Pipe connections | Water inlet/outlet pipe | inch | RC3/4 |
| Drain pipe | mm | ODφ32 | |
Based on Eurovent conditions:
H: High fan speed; M: Medium fan speed; L: Low fan speed.
- Cooling mode (2-pipe coil): entering air temperature 27°C DB/19°C WB, entering/leaving water temperature 7°C /12°C, high fan speed.
- Heating mode (1): (2-pipe coil): entering air temperature 20°C DB, entering/leaving water temperature 45/40°C, high fan speed.
- Heating mode (2): (2-pipe coil): entering air temperature 20°C DB, enter water temperature/water flow 50°C
| Cooling Capacity | 5.93 / 5.3 / 4.4 kW |
| Heating Capacity | 8.42 / 7.37 / 6.06 kW |