The Midea MC-SS130/RN1L air cooled scroll chiller comes with new compact structure design, H shape condenser, 360° air suction (intake), an intelligent defrosting technology that ensures little fluctuation on water temperature and excellent noise control.
The modular design of the Midea MC-SS130/RN1L air cooled scroll chiller facilitates easy expansion in phases to respond to additional cooling/heating requirements. Maximum 16 units (1 main unit and 15 slave units) can be combined in one modular system to achieve maximum capacity of 2080 kW. Meanwhile, every separate module can be operated as the main unit, also each module can be a slave unit.
If the master unit fails, all the units will stop. When the master unit fails, any of the slave one can be set as the master unit by manual setting. If one slave unit fails, this unit will stop but the others will keep running.
If master unit’s protection happens, this unit will stop but the others will keep running. If slave unit’s protection happens, this unit will stop but the others will keep running. Exceptions: PE and P9 protections. PE: Low-temperature protection of evaporator. P9: Outlet and inlet water temperature difference protection.
In one combination, all slave units operate as an alternative in cycle duty to keep equal running time, realize higher stability, better reliability and longer lifespan. (For example, five modules combination, no.1 is master unit, others are slave units.)
|Power supply||V/Ph/Hz||380 - 415 / 3 / 50|
|Max. running current||A||109|
|Air side heat exchanger (Condenser)||Type||Fin-coil|
|Fan motor type||AC Motor|
|Quantity of fan motor||Pieces||2|
|Water side heat exchanger (Evaporator)||Type||Shell-tube|
|Water pressure drop||kPa||40|
|Water flow volume||m3/h||22.4|
|Sound pressure level (Noise level)||dB(A)||68|
|Dimensions||Net (D×H×W)||mm||2200 × 2060 × 1120|
|Packing size (D×H×W)||mm||2250 × 2200 × 1180|
|Pipe connections||Water inlet/outlet||mm||DN65|
|Cooling||°C||-10 ~ 46|
|Heating||°C||-15 ~ 24|
|Water outlet temperature|
range (Operation water temp)
|Cooling||°C||0 ~ 17|
|Heating||°C||25 ~ 50|
|Safety protection device||1. Protection for over-high discharge pressure.|
2. Protection for over-low suction pressure.
3. Power supply phase sequence protection.
4. Anti-freezing protection in cooling mode.
5. Anti-freezing protection in Winter.
6. Protection for compressor over current.
7. Protection for compressor overload.
8. Outlet and inlet water temperature difference protection.
9. Compressor discharge temperature protection.
10. Water flow cut-off protection.
11. Sensor malfunction protection.
12. Low-temperature protection of evaporator.
|Series||Aqua Tempo Super series 50Hz|
|Cooling Capacity||130 kW|
|Heating Capacity||138 kW|